30A Solar Charge Controler Cm3024z Free Shipping

 1,899 2,899 (-34%)

2 in stock

 1,899 2,899 (-34%)

Description

Features:
>>Image of LCD graphic symbol
>>Simple button operation
>>Automatic Identification System Voltage level
>>Intelligent PWM charge mode
>>Automatic Temperature Compensation
>>Adjustable charge-discharge control parameters
>>Settable Operating mode of Load
>>Overload, Short Circuit Protection
>>Remote monitoring and control function (custom)
>>Battery reverse-discharge protection
>>Battery Low Voltage Disconnection (LVD)
>>Battery reverse connection protection
>>Accumulated function of charge and discharge Ampere hours

 

Installation
1. Ready tools and cables. Encourage you to matching the right cables. Ensure that the current density<4mm2 that is conductive to reducing the line voltage drop. Recommended: 60A with 20mm2 cable. Check weather the installation sitescompliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.
2. Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.
3. As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.
4. Put into the external temperature sensor on the left of the controller (probe port). The temperature sensor should be similar space with battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation.)
5.If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to The host computer.
Demolition: To prevent accidents, please order the demolition of solar panels, battery and load disconnect with controller.
Note:Battery polarity will not damage the controller, but you will have a load equipment security risks.

 

Specification

Additional information

Weight 0.5 kg

Reviews (11)

Average Rating

5.00

09
( 11 Reviews )
5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%
Add a review

Your email address will not be published. Required fields are marked *

11 Reviews For This Product

  1. 09

    by jamal

    sir, is me ampere wala bhi hy

    • by Mrengineer

      YEH AMPERER WALA HI HY

  2. 09

    by Muhammad Shafqat

    It is of very good quality. It is running very well and it is a very powerful solar charger controller. I am using it myself. Thanks. Smart e-shop.

  3. 09

    by Aslam

    Same As Show In PHoto.

  4. 09

    by Muddassir sethi

    Ye 180w ki kitni plates support kre ga

  5. 09

    by Zia ullah

    Ok

  6. 09

    by SYED INAYATULLAH

    150 or 180 watt solar panel pe use krunga 12 volt pr…. Kia ye kam kryga ya nai.

  7. 09

    by Abid Ali (verified owner)

    Better Quality than first

  8. 09

    by moonlightcomputeruk

    Sir Kya Ye 12v / 24v Dono Pi Kam Karta Hai plz help me

  9. by Mrengineer

    Dear sir compney nay controller k andar builtin temperature sensor laga dia hay enternal lagany ki zaroort nahi hay.shukria,

  10. by Buy Socks Proxies

    Very nice post. I certainly appreciate this site. Keep it up!

  11. 09

    by Muhammad Asim

    Bhai ais ky load capacity ktny hai?

30A Solar Charge Controler Cm3024z Free Shipping

 1,899 2,899 (-34%)

Add to Cart